Your Navigation Path

Captive Reel Winches - Harken




Captive Reel Winches - Harken
<< Return to previous page
Category #: 5025
Bookmark or Share this Page:

Captive winches are designed to suit individual drum length and storage requirements. Harken captives utilize a Brevini hydraulic industrial class auto change two-speed motor, an automatic fail-safe brake, and an epicyclic industrial class gearbox. The hub-drive-type gearbox fits within the 316 stainless steel winch drum. At the opposite end of the drum is a guarded gear train arranged to time the stainless steel feed screw at the correct speed for the sheet size specified. Standard specification includes two 24v 300mA proximity switches at each end of travel that are hard wired to a single 4-way distributor box. The inner two switches are factory-set at the design active length of the sheet. The outer two switches are intended as over-travel protection and should be used to either dump oil to tank and/or shut down the winch completely in the event of over-travel occurring.

The frame and components of the winch are manufactured in 5083 or 6000 series heat-treated marine-grade aluminum. All fastenings are 316SS.

Bearings are sealed where necessary or in some cases are of dry-run synthetic material. Grease points are provided. Both ends of the drum and the gear train are guarded. Aluminum parts are anodized and the steel parts of the drive are protected with an industrial class protection system. Each hold down point on the winch is fitted with an insulation bush. Hold down fastenings are not included.

PLEASE CALL FOR PRICING AT: 231-759-8596

 

 
CR33SLLT - Harken Captive Reel Winch 33CM Single Line


Sorry price not on file email us for details


CR33SLHD - Harken Captive Reel Winch


Sorry price not on file email us for details

CR50SLHD - Harken Captive Reel Winch


Sorry price not on file email us for details

CR40SLHD - Harken Captive Reel Winch


Sorry price not on file email us for details